From: STEVER, RANDY (SWBT) (rs4987@sbc.com)
Date: Wed Sep 25 2002 - 16:36:21 GMT-3
Beda,
I don't have a 3550 in my lab nor have I configured one in the field, but I
expect it will be much like a 3524 switch's management interface. Below are
the commands you would issue to setup vlan 50 on a Catalyst 3524 switch.
If the 3550 is functioning in a layer 2 capacity, you will probably be
required to shut down interface vlan1 before Vlan50 begins to function. You
will also have to configure at least one port on the switch to be in vlan 50
so you have layer 2 connectivity to the management vlan.
I hope this helps...
interface VLAN50
ip address 192.168.1.1 255.255.255.0
Randy Stever
CCNP, CCDP
-----Original Message-----
From: beda jain [mailto:bpjain@cisco.com]
Sent: Wednesday, September 25, 2002 1:56 PM
To: Prakash H Somani; Volkov,Dmitry(Toronto - BCE)
Cc: 'ccielab@groupstudy.com'
Subject: sc0 in 3550
Hi,
How i will configure ip address for management access in 3550 just like sc0
in cat5505, so that all router can telnet
to 3550 and this address will be in vlan 50.
Thanks,
Beda
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:03 GMT-3