From: Voss, David (dvoss@heidrick.com)
Date: Wed Sep 25 2002 - 22:15:36 GMT-3
Do you know the following answers (or know where to find them) off the top
of your head? EIGRP is easier to learn that OSPF (I believe), but that
doesn't mean it's easy.
Change the hold-time interval for EIGRP without using "ip hold-time eigrp"
command.
Change the hello interval for EIGRP without using "ip hello-interval"
command.
Change EIGRP metric on R1 to not take reliability into consideration. How
will this affect your neighbors?
Create EIGRP stub routing so that the router advertises all connected routes
to a neighbor. Do not use a "redistribute" command to perform this.
Create load balancing using 3 routes one with metric 100, one with 200, one
with 300 and have EIGRP use all three paths.
I grabbed these JUST from Solie's book. I'm sure there is plenty more.
-----Original Message-----
From: Richard Davidson [mailto:rich@myhomemail.net]
Sent: Wednesday, September 25, 2002 6:57 PM
To: groupstudy
Subject: EIGRP on the exam
I'm curious, how hard can eigrp be? I know the basics. I know igrp will
not be on the exam, but how hard can they make a lab with eigrp? Is eigrp
worth knowing inside out like ospf?
Rich
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:03 GMT-3