From: John Mistichelli (jmistichelli@yahoo.com)
Date: Thu Sep 26 2002 - 11:08:02 GMT-3
We have fought that very issue for some time. After a
great deal of trial and effort we have found a version
of code that seems to be pretty stable on the 3810s.
It is mc3810-a2jsv556i-mz.121-5.T12.bin
John
7536
_______________________
http://www.routopia.com
Your source for remote CCIE equipment rental. We have
ATM, ISDN, Catalyst 3550, lab scenarios and more. All
at a low low rental price. No source will give you a
more comprehensive solution at such a low price.
Guaranteed!
--- Brian Dennis <brian@5g.net> wrote:
> It's a known issue with the command. That's why
> Cisco doesn't recommend
> using the command on production routers if at all
> possible.
>
> Also you might try "no alias exec csim reload" in
> the global config ;-)
>
> Brian Dennis, CCIE #2210 (R&S/ISP Dial)
>
> -----Original Message-----
> From: nobody@groupstudy.com
> [mailto:nobody@groupstudy.com] On Behalf Of
> Tu Nguyen
> Sent: Wednesday, September 25, 2002 10:44 AM
> To: ccielab@groupstudy.com
> Subject: Router Reboot Upon Input csim star
>
> Hi,
>
> Have any seen this before? Upon inserting the csim
> star command, the
> router got reboot!!
>
> Thanks,
>
> Tu
>
>
> Cisco Internetwork Operating System Software
> IOS (tm) C2600 Software (C2600-IS-M), Version
> 12.0(7)T, RELEASE
> SOFTWARE (fc2)
> Copyright (c) 1986-1999 by cisco Systems, Inc.
> Compiled Tue 07-Dec-99 02:21 by phanguye
> Image text-base: 0x80008088, data-base: 0x80C524F8
>
> cisco 2621 (MPC860) processor (revision 0x102) with
> 53248K/12288K bytes
> of memory.
> Processor board ID JAB04130735 (3364644779)
> M860 processor: part number 0, mask 49
> Bridging software.
> X.25 software, Version 3.0.0.
> 2 FastEthernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 2 Voice FXS interface(s)
> 32K bytes of non-volatile configuration memory.
> 8192K bytes of processor board System flash
> (Read/Write)
>
---------------------------------------------------------
> R1#csim star 3159
> csim: called number = 3159, loop count =
> *** System received a SegV exception ***
> signal= 0xb, code= 0x1100, context= 0x81321d28
> PC = 0x0, Vector = 0x1100, SP = 0x8166df00
> *** Unexpected Console tx-ready interrupt ***
> PC = 0xfff03fc4, Vector = 0x500, SP = 0x81322f34
>
> System Bootstrap, Version 11.3(2)XA4, RELEASE
> SOFTWARE (fc1)
> Copyright (c) 1999 by cisco Systems, Inc.
> TAC:Home:SW:IOS:Specials for info
> C2600 platform with 65536 Kbytes of main memory
>
> program load complete, entry point: 0x80008000,
> size: 0x6fdb4c
> Self decompressing the image :
>
########################################################################
>
###############################################################
=====
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:04 GMT-3