From: Dave Stoddard (dstoddard@thrupoint.net)
Date: Sun Sep 29 2002 - 02:49:30 GMT-3
You need to configure your loopback interface on R3 with the "ip ospf
network point-to-point" statement.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
BIGB97750@aol.com
Sent: Saturday, September 28, 2002 3:58 PM
To: ccielab@groupstudy.com
Cc: Bstair1024@aol.com
Subject: OSPF to IGRP Redistribution
Everyone,
I am working on a problem with three routers R3, R1, R4. R3 is advertising
his loopback address under OSPF with a network statement for area 0. R1 is
performing mutual redistribution between OSPF and IGRP. R1 route table shows
the loopback address with /32 mask. R4 does not learn about the loopback
address via redistribution. Why? Below are the configs
R3
router ospf 2001
area 0 authentication message-digest
network 155.100.34.0 0.0.0.255 area 0
network 155.100.37.0 0.0.0.255 area 70
network 155.100.38.0 0.0.0.255 area 70
network 155.100.39.0 0.0.0.255 area 70
network 155.100.123.1 0.0.0.0 area 0
R1
!
router ospf 2001
log-adjacency-changes
area 0 authentication message-digest
redistribute connected subnets tag 2
redistribute igrp 2001 subnets tag 3
redistribute eigrp 105 subnets tag 1
network 155.100.16.0 0.0.0.255 area 0
network 155.100.34.0 0.0.0.255 area 0
neighbor 155.100.34.3 priority 1
neighbor 155.100.34.2 priority 1
default-metric 10
!
router igrp 2001
redistribute ospf 2001
redistribute eigrp 105
network 155.100.0.0
default-metric 10000 1000 255 1 1500
distance 150
R4
router igrp 2001
network 155.100.0.0
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:06 GMT-3