From: ying c (bf5tgh1@yahoo.com)
Date: Mon Sep 30 2002 - 01:47:16 GMT-3
Hi,
The following is what I had:
R1--ring1---3920(trbrf10)----ring1---R2
No ping between R1 and R2, although both routers can
ping 3920 without any problems. If I change R2's ring
number to 2, then I can ping among R1, R2 and 3920.
When I have the same ring number, R1 and R2 can only
ping each other when I use SRT. What did I do wrong?
Or when we have SRB, 3920 cannot have the same ring
number? Can someone please explain?
Thanks,
Chang
R1:
interface TokenRing0
ip address 148.24.89.8 255.255.255.0
no ip directed-broadcast
ring-speed 16
multiring all
source-bridge 1 8 200 <<-- can ping without it
R2: (could ping R1 when 3920 was configure to have
ring 1)
interface TokenRing0
ip address 148.24.89.9 255.255.255.0
ring-speed 16
multiring all
source-bridge 2 1 200 <-- can ping without it
3920:
VLAN ID 102
VLAN Name crf 102
Parent VLAN bridge 10
State Operational
Ring Number 0x01
Bridging Mode SRB
Max ARE Bridge Hop Count 7
Max STE Bridge Hop Count 7
Backup CRF No
VLAN ID 103
VLAN Name crf 103
Parent VLAN bridge 10
State Operational
Ring Number 0x02 <<<-- OK here,
but wasn't OK when it's 0x01
Bridging Mode SRB
Max ARE Bridge Hop Count 7
Max STE Bridge Hop Count 7
Backup CRF No
Ports in TrCRF 9
This archive was generated by hypermail 2.1.4 : Mon Oct 07 2002 - 07:44:07 GMT-3