From: thunai@netsol.co.in
Date: Tue Oct 08 2002 - 07:42:14 GMT-3
i am trying to download from an working router which is basically 2503 , it
gives the same error message and also from software center i downloaded
12.07T still it gives the same error message .
If you look closly at show flash err , u infer some thing from that
or its quite normal .
thanks
thunai
> -----Original Message-----
> From: Donny MATEO [SMTP:donny.mateo@sg.ca-indosuez.com]
> Sent: Tuesday, October 08, 2002 4:08 PM
> To: thunai@netsol.co.in
> Cc: ccielab@groupstudy.com; nobody@groupstudy.com
> Subject: Re: OT: Urgent Help req on 2501
>
>
> have you tried a different IOS software ? or copy this IOS to another
> router to verify. If this
> software works on other router, than you can easily conclude it's the IOS.
> If not, most probably the
> router flash is corrupted or there is an interuption during the IOS upload
> phase.
>
> Donny
>
>
>
>
> thunai@netsol.co.
>
> in To:
> ccielab@groupstudy.com
>
> Sent by: cc:
>
> nobody@groupstudy Subject: OT: Urgent Help
> req on 2501
> .com
>
>
>
>
>
> 08-10-2002 18:00
>
> Please respond to
>
> thunai
>
>
>
>
>
>
>
>
>
> Hai group ,
> Cisco 2501 is giving me the following error message when do an
> ios upgrade
>
>
> Verifying checksum... invalid (expected 0x8007, computed 0xC97F)
> Flash copy took 0:04:56 [hh:mm:ss]
>
>
> Flash copy took 0:04:56 [hh:mm:ss]
> Router(boot)#show flash
>
> System flash directory:
> File Length Name/status
> 1 7433568 c2500-i-l.120-7.T2.bin [invalid checksum]
> [7433632 bytes used, 954976 available, 8388608 total]
> 8192K bytes of processor board System flash (Read/Write)
>
> Router(boot)#
>
>
>
> Router(boot)#show flash detailed
>
> System flash directory:
> File Length Name/status
> addr fcksum ccksum
> 1 7433568 c2500-i-l.120-7.T2.bin [invalid checksum]
> 0x40 0x8007 0xC97F
> [7433632 bytes used, 954976 available, 8388608 total]
> 8192K bytes of processor board System flash (Read/Write)
>
>
>
> Router(boot)#show flash err
>
> System flash directory:
> File Length Name/status
> 1 7433568 c2500-i-l.120-7.T2.bin [invalid checksum]
> [7433632 bytes used, 954976 available, 8388608 total]
> 8192K bytes of processor board System flash (Read/Write)
>
> Chip Bank Code Size Name erase write
> 1 1 89A2 1024KB INTEL 28F008SA 0 0
> 2 1 89A2 1024KB INTEL 28F008SA 0 0
> 3 1 89A2 1024KB INTEL 28F008SA 0 0
> 4 1 89A2 1024KB INTEL 28F008SA 0 0
> 1 2 89A2 1024KB INTEL 28F008SA 0 565367
> 2 2 89A2 1024KB INTEL 28F008SA 0 0
> 3 2 89A2 1024KB INTEL 28F008SA 0 0
> 4 2 89A2 1024KB INTEL 28F008SA 0 0
> Router(boot)#
>
>
> Please give your suggestions is the flash bad , or can i do some
> workaround to me it work ..
>
> Thanks in advance
> warm regds
> thunai
>
>
>
>
>
> This message is for information purposes only and its content
> should not be construed as an offer, or solicitation of an offer,
> to buy or sell any banking or financial instruments or services
> and no representation or warranty is given in respect of its
> accuracy, completeness or fairness. The material is subject
> to change without notice. You should take your own independent
> tax, legal and other professional advice in respect of the content
> of this message. This message may contain confidential or
> legally privileged material and may not be copied, redistributed
> or published (in whole or in part) without our prior written consent.
> This email may have been intercepted, partially destroyed,
> arrive late, incomplete or contain viruses and no liability is
> accepted by any member of the Credit Agricole Indosuez group
> as a result. If you are not the intended recipient of this message,
> please immediately notify the sender and delete this message
> from your computer.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:42 GMT-3