From: thunai@netsol.co.in
Date: Tue Oct 08 2002 - 09:47:23 GMT-3
Hai
I there any way i can increase my tftp wait time , for the same
problem i trying boot my router thru the tftp server , however what is
happening is i have a 3com switch which takes time to intialize the port
where i reboot the router ( i dont have something like portfast ) . i am
trying to increase tftp netboot time so that it will reach my tftp server..
thanks warm regds
thunai
> -----Original Message-----
> From: Widjaja Surja Kentjana AERADIO [SMTP:widjaja@aeradio.com.sg]
> Sent: Tuesday, October 08, 2002 4:40 PM
> To: thunai@netsol.co.in; ccielab@groupstudy.com
> Subject: RE: OT: Urgent Help req on 2501
>
> Hi,
>
> Some incompatible flash may caused this problem too.
>
> WIdjaja
>
> -----Original Message-----
> From: Phil [mailto:ciscostudent1@yahoo.com.br]
> Sent: Tuesday, October 08, 2002 6:57 PM
> To: thunai@netsol.co.in; ccielab@groupstudy.com
> Subject: Re: OT: Urgent Help req on 2501
>
>
> Well, if the router was working before the flash upgrade, the most
> probable
> cause is a bad image. Try using another image.
> Phil
>
> thunai@netsol.co.in wrote:Hai group ,
> Cisco 2501 is giving me the following error message when do an
> ios upgrade
>
>
> Verifying checksum... invalid (expected 0x8007, computed 0xC97F)
> Flash copy took 0:04:56 [hh:mm:ss]
>
>
> Flash copy took 0:04:56 [hh:mm:ss]
> Router(boot)#show flash
>
> System flash directory:
> File Length Name/status
> 1 7433568 c2500-i-l.120-7.T2.bin [invalid checksum]
> [7433632 bytes used, 954976 available, 8388608 total]
> 8192K bytes of processor board System flash (Read/Write)
>
> Router(boot)#
>
>
>
> Router(boot)#show flash detailed
>
> System flash directory:
> File Length Name/status
> addr fcksum ccksum
> 1 7433568 c2500-i-l.120-7.T2.bin [invalid checksum]
> 0x40 0x8007 0xC97F
> [7433632 bytes used, 954976 available, 8388608 total]
> 8192K bytes of processor board System flash (Read/Write)
>
>
>
> Router(boot)#show flash err
>
> System flash directory:
> File Length Name/status
> 1 7433568 c2500-i-l.120-7.T2.bin [invalid checksum]
> [7433632 bytes used, 954976 available, 8388608 total]
> 8192K bytes of processor board System flash (Read/Write)
>
> Chip Bank Code Size Name erase write
> 1 1 89A2 1024KB INTEL 28F008SA 0 0
> 2 1 89A2 1024KB INTEL 28F008SA 0 0
> 3 1 89A2 1024KB INTEL 28F008SA 0 0
> 4 1 89A2 1024KB INTEL 28F008SA 0 0
> 1 2 89A2 1024KB INTEL 28F008SA 0 565367
> 2 2 89A2 1024KB INTEL 28F008SA 0 0
> 3 2 89A2 1024KB INTEL 28F008SA 0 0
> 4 2 89A2 1024KB INTEL 28F008SA 0 0
> Router(boot)#
>
>
> Please give your suggestions is the flash bad , or can i do some
> workaround to me it work ..
>
> Thanks in advance
> warm regds
> thunai
>
>
> ---------------------------------
> Yahoo! GeoCities
> Tudo para criar o seu site: ferramentas faceis de usar, espago de sobra e
> acesssrios.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:42 GMT-3