From: Nick Shah (nshah@connect.com.au)
Date: Sun Oct 13 2002 - 06:29:43 GMT-3
Answers inline...
> When applying the frame-relay map-class to a Main
> interface. In a situation where there are no
> sub-interfaces. Is it recommended to apply
>
> Scenario 1
>
> interface s0/1
> encap frame-relay
> frame-relay traffic-shaping
> frame-relay class ccie
All the subinterfaces underneath S0/1 and their respective PVC's (DLCI) will
inherit the traffic shaping parameters specified in map class CCIE. However
if you want to over ride this behaviour, just specify different map class on
a PVC/subif where you want to use different parameters.
> Scenario 2
>
> interface s0/1
> encap frame-relay
> frame-relay traffic-shaping
> frame-relay interface-dlci 100
> class ccie
You seem to have forgotten the IP ADDRESS on s0/1.
In this case only DLCI/PVC 100 will inherit traffic shaping parameters
specified in class CCIE
This is recommended.
rgds
Nick
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:45 GMT-3