From: Georg Pauwen (pauwen@hotmail.com)
Date: Sun Oct 13 2002 - 15:57:37 GMT-3
Tim,
this might just be a shot in the dark, but I remember the exact same lab
from IP Experts, and I messed it up as well because I had the DN4s wrong. In
your case, try DN 835662 instead of 835661:
###R2###
dialer string 8358662
Regards,
Georg
>From: "Tim Ross" <ross2k@pclv.com>
>Reply-To: "Tim Ross" <ross2k@pclv.com>
>To: <ccielab@groupstudy.com>
>Subject: ISDN Dialer Profile problem
>Date: Sat, 12 Oct 2002 22:11:22 -0700
>
>I am having problems with dialer profiles. I'm doing the ECP1 lab and can
>not get the R2 router to dial R1 by using a Dialer Profile. I've viewed the
>solution and copied it exactly with no success. There is no error message,
>a
>ping just times out if trying to ping the other interface. I can setup
>Dialer Map on the physical interface and it works immediately. I'm using
>IOS
>Version 12.1.(15) with a Teltone Demonstrator, and using two 2621's with
>BRI0/0 interfaces. Anyone have a similar problem? I was wondering if there
>is a problem with this particular IOS version, or maybe the combination I'm
>using due to the logical inteface and the Teltone simulator. I've used a
>variety of different "dialer remote-name" and tried with and without chap,
>etc..
>
>#### R2 ####
>
>dialer-list 1 protocol ip permit
>!
>interface BRI0/0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 0835866201
> isdn spid2 0835866401
>!
>interface Ethernet0/1
> no ip address
> shutdown
>!
>interface Dialer0
> ip address 144.7.21.2 255.255.255.0
> encapsulation ppp
> ip ospf demand-circuit
> dialer pool 1
> dialer remote-name Rack04R1
> dialer string 8358661
> dialer-group 1
>!
>##### R1 #####
>
>dialer-list 1 protocol ip permit
>!
>interface BRI0/0
> no ip address
> encapsulation ppp
> dialer pool-member 1
> isdn switch-type basic-ni
> isdn spid1 0835866101
> isdn spid2 0835866301
>!
>interface FastEthernet0/1
> no ip address
> shutdown
> duplex auto
> speed auto
>!
>interface Serial0/1
> ip address 144.7.91.1 255.255.255.0
>!
>interface Dialer0
> ip address 144.7.21.1 255.255.255.0
> encapsulation ppp
> dialer pool 1
> dialer remote-name Rack04R2
> dialer-group 1
>!
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:46 GMT-3