Re: Redistributing between ospf and rip

From: LoizosCisco (david_steven2001@yahoo.com)
Date: Thu Oct 17 2002 - 22:48:14 GMT-3

Next message: Peter: "Re: Frame Relay back-to-back on T1 CSU/DSU module"
Previous message: Richard Davidson: "RE: bgp bestpath med missing-as-worst :-("
Maybe in reply to: Steven B. Holmes: "Redistributing between ospf and rip"
Next in thread: Donny MATEO: "Re: Redistributing between ospf and rip"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Check this cisco site....it might help:

http://www.cisco.com/en/US/tech/tk648/tk365/technologies_tech_note09186a0080093fd9.shtml

--- "Steven B. Holmes" <steven_b_holmes@hotmail.com>
wrote:
> I'm working on a lab that do not allow you to use
> static routes or default
> gateways. Rip is x.x.x.x 255.255.255.240 and the
> ospf domain has x.x.x.x
> 255.255.255.24. I'm need to let the ospf routers
> see the rip routes. I
> tried summary-address and for fun area X range. I
> need some help!
>
>
> Thanks!
>
>
>
>
>

Next message: Peter: "Re: Frame Relay back-to-back on T1 CSU/DSU module"
Previous message: Richard Davidson: "RE: bgp bestpath med missing-as-worst :-("
Maybe in reply to: Steven B. Holmes: "Redistributing between ospf and rip"
Next in thread: Donny MATEO: "Re: Redistributing between ospf and rip"
Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:50 GMT-3