From: aansar@sscomp.com.sg
Date: Fri Oct 18 2002 - 00:27:18 GMT-3
i cant access this cco URL.. any key in mistake?
Richard
Davidson To: Brian McGahan <brian@cyscoexpert.com>, "'Richard Davidson'"
<rich@myhomem <rich@myhomemail.net>, "'groupstudy'" <ccielab@groupstudy.com>
ail.net> cc:
Sent by: Subject: RE: bgp bestpath med missing-as-worst :-(
nobody@groups
tudy.com
18-10-02
09:45 AM
Please
respond to
Richard
Davidson
That makes more sense. So if I wanted to make sure any med of 0 is changed
to 2^32 I would have to use a route-map and is this something I would want
to do in the first place?
Brian McGahan <brian@cyscoexpert.com> wrote:Richard,
The command is working correctly. The key point to keep in mind
is 'missing' MED. A MED of NULL and a MED of 0 are not the same. In
the case presented here, all MEDs that were missing received a value of
2^32, and everything else remained the same.
For more detail:
http://www.cisco.com/en/US/tech/tk648/tk365/technologies_tech_note09186a
0080094431.shtml
HTH
Brian McGahan, CCIE #8593
Director of Design and Implementation
brian@cyscoexpert.com
CyscoExpert Corporation
Internetwork Consulting & Training
Voice: 847.674.3392
Fax: 847.674.2625
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf
Of
> Richard Davidson
> Sent: Thursday, October 17, 2002 7:02 PM
> To: groupstudy
> Subject: bgp bestpath med missing-as-worst :-(
>
> I have had the worst time with this bgp bestpath med missing-as-worst
> command. It never seems to work right. As you can see I have the
command
> in the bgp config, but the bgp routing table does not make all of the
zero
> metrics 2^32 metrics. I got it to work using and inbound route map
with
> the metric to zero but no other time. Does this command just not work
> right in general. Does any one know any links or pages in books that
will
> help explain this?
>
> Rich
>
> ****
>
> #srb bgp
> router bgp 1
> bgp always-compare-med
> bgp bestpath med missing-as-worst
> bgp bestpath compare-routerid
> network 20.20.20.0 mask 255.255.255.0
> network 150.150.150.0 mask 255.255.255.0
> network 192.168.1.0
> network 192.168.2.0
> network 192.168.3.0
> network 192.168.4.0
> neighbor 150.150.150.2 remote-as 2
> neighbor 193.16.0.1 remote-as 2
>
> *********
>
> A#sib
> BGP table version is 26, local router ID is 192.168.4.1
> Status codes: s suppressed, d damped, h history, * valid, > best, i -
> internal
> Origin codes: i - IGP, e - EGP, ? - incomplete
>
> Network Next Hop Metric LocPrf Weight Path
> *> 0.0.0.0 193.16.0.1 30 0 2 ?
> * 150.150.150.2 4294967294 0 2 ?
> *> 6.6.6.0/24 193.16.0.1 0 0 2 i
> * 150.150.150.2 4294967294 0 2 i
> *> 20.20.20.0/24 0.0.0.0 0 32768 i
> *> 150.150.150.0/24 0.0.0.0 0 32768 i
> *> 172.16.0.0/30 150.150.150.2 0 0 2 i
> * 193.16.0.1 0 0 2 i
> *> 172.16.0.16/30 193.16.0.1 0 0 2 ?
> * 150.150.150.2 4294967294 0 2 ?
> *> 192.168.1.0 0.0.0.0 0 32768 i
> *> 192.168.2.0 0.0.0.0 0 32768 i
> *> 192.168.4.0 0.0.0.0 0 32768 i
> *> 193.16.0.0/30 193.16.0.1 0 0 2 ?
> * 150.150.150.2 4294967294 0 2 ?
> *> 193.16.1.0 193.16.0.1 30 0 2 ?
> * 150.150.150.2 4294967294 0 2 ?
> A#
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:50 GMT-3