From: Richard Davidson (rich@myhomemail.net)
Date: Sun Oct 20 2002 - 03:45:51 GMT-3
So they just put any software on the lab pc and expect you to use it? I thought hyper terminal was the only one that could be used. Do they have reflections at all of the lab sites? If so then I should be using that in my prep time. Hyper terminal sucks anyway.
kym blair <kymblair@hotmail.com> wrote: Richard,
With HyperTerm you go to FILE > PROPERTIES > SETTINGS > ASCII SETUP and set
the Line Delay to 1500 ms or 2000 ms depending on your topology.
That inserts a delay between each command line to allow each ping to
complete before going to the next.
NOTE: In the Lab, you may prefer not to use HyperTerm, but to use whatever
windowing software they have; some labs have Reflections. At home, I've
switched to CRT (www.vandyke.com) and others like SecureCRT. You need to
add a card to your computer to give you 8-16 COM ports.
To set the line delay on CRT, go to OPTIONS > GLOBAL OPTIONS > OPTIONS >
ADVANCED and set the Line Send Delay to 1500 ms or 2000 ms.
HTH, Kym
>From: Richard Davidson
>Reply-To: Richard Davidson
>To: groupstudy
>Subject: Auto ping script
>Date: Sat, 19 Oct 2002 20:01:47 -0700 (PDT)
>
>Does anyone know how to automate a ping script using hyper terminal? I
>think this would be very helpful in the lab. I tried just cutting and
>pasting something like this:
>
>p 172.16.0.2
>p 193.16.0.2
>p 193.16.0.1
>
>This does not work. Only the first one pings the rest is played in to the
>router when it's doing the first ping.
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:52 GMT-3