Re: 3550 BGP Issue

From: MADMAN (dave@interprise.com)
Date: Tue Oct 22 2002 - 10:57:51 GMT-3

• Next message: thomas.e.hopson@power.alstom.com: "2948g-l3 for practice"
• Previous message: Hunt Lee: "Point-to-Point with Multipoint"
• Maybe in reply to: jim.phillipo@guardent.com: "3550 BGP Issue"
• Next in thread: jim.phillipo@guardent.com: "RE: 3550 BGP Issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

  It's supported in the latest release:

C3550-L3#conf t
Enter configuration commands, one per line. End with CNTL/Z.
C3550-L3(config)#router bgp 1
C3550-L3(config-router)#

C3550-L3#sh ha
Cisco Internetwork Operating System Software
IOS (tm) C3550 Software (C3550-I5Q3L2-M), Version 12.1(11)EA1, RELEASE
SOFTWARE
(fc1)

  Dave

jim.phillipo@guardent.com wrote:
>
> Whats up with this ?
>
> It appears that the command is ok but it will not take it ?
>
> cat1#conf t
> Enter configuration commands, one per line. End with CNTL/Z.
> cat1(config)#router bgp ?
> <1-65535> Autonomous system number
>
> cat1(config)#router bgp 4799 ?
> <cr>
>
> cat1(config)#router bgp 4799
> Unknown routing protocol
> cat1(config)#

-- 
David Madland
CCIE# 2016
Sr. Network Engineer
Qwest Communications
612-664-3367
"You don't make the poor richer by making the rich poorer." --Winston
Churchill

• Next message: thomas.e.hopson@power.alstom.com: "2948g-l3 for practice"
• Previous message: Hunt Lee: "Point-to-Point with Multipoint"
• Maybe in reply to: jim.phillipo@guardent.com: "3550 BGP Issue"
• Next in thread: jim.phillipo@guardent.com: "RE: 3550 BGP Issue"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:53 GMT-3