From: aansar@sscomp.com.sg
Date: Wed Oct 23 2002 - 22:38:08 GMT-3
the condition is, should not use any IP OSPF NETWORK commands. then how
jay
"Jay" <ccienxtyear@hotmail.com>
10/24/2002 09:38 AM
To: <aansar@sscomp.com.sg>, <ccielab@groupstudy.com>
cc:
Subject: Re: Adv Router is not-reachable
configure under the serial interfaces "ip ospf network broadcast"
-Jay
----- Original Message -----
From: <aansar@sscomp.com.sg>
To: <ccielab@groupstudy.com>
Sent: Wednesday, October 23, 2002 6:01 PM
Subject: Adv Router is not-reachable
> sh ip os data router , shows
> Adv Router is not-reachable
> but adjutancy has been established already .. what could be the problem.
>
> R1
> has point to point frame relay interface towards R2
>
> R2
> normal plain serial interface (initially hello mis matches , i changed
> hello interval of R2 )
>
> Adancy has been estabilised , no problem
> but R2 routes are not visible in R1, (sh ip os data router , shows all
the
> LSA of R2 but the first line tells adv router is not reachable)
>
> Adv Router is not-reachable
> LS age: 1625
> Options: (No TOS-capability, DC)
> LS Type: Router Links
> Link State ID: 7.7.7.7
> Advertising Router: 7.7.7.7
> LS Seq Number: 80000005
> Checksum: 0xF048
> Length: 156
> Number of Links: 11
>
> thanks
> aa
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:55 GMT-3