From: Jay (ccienxtyear@hotmail.com)
Date: Thu Oct 24 2002 - 13:55:33 GMT-3
you need to disable split horizon on the Hub router.
Jay
----- Original Message -----
From: "Angelo De Guzman" <ghie_pogi@yahoo.com>
To: <ccielab@groupstudy.com>
Sent: Wednesday, October 23, 2002 11:18 PM
Subject: ip split-horizon eigrp
> Hi,
> R2 -|
> / |
> R1 |172.168.38.0/24
> \ |
> R3 -|
>
> R1 subinter is point-to-multi
> R2 is physical
> R3 is physical
>
> I'm running EIGRP.
>
> Do I need to enable?
>
> ip split-horizon eigrp 10 on the spokes
>
> My objective is to see the ethernet network on R1
> via R2 and R3.
>
> Actually when I use no or with ip split-horizon eigrp
> 10 on the spokes. I see on R1 network 172.168.38.0
> reachable via R2 and R3. So what is correct?
>
> Thanks,
> Angelo
>
>
> __________________________________________________
> Do you Yahoo!?
> Y! Web Hosting - Let the expert host your web site
> http://webhosting.yahoo.com/
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:56 GMT-3