From: aansar@sscomp.com.sg
Date: Sun Oct 27 2002 - 23:44:19 GMT-3
here is the sample config of two routers .
my suggestion is that you cant understand vofr by using solie book..
either read from the cco or use some other books..
certain things you have to know in terms vofr encaps .. Like vofr cisco ,
FRF.12 or FRF.11 , even i am too confused , but i know these things are
there...
dont forget to use use <fram traffic shaping > in physical interface , if
u dont use this command , all the ip communication over point to point
interface stops, for instances EIGRP neighbor relationship is dead and you
cant ping the ptop interface.. i am also trying to figure it out why...
use debug commands like
debug ccswvoice vofr-debug and certain show commands
sh fram frag
sh fram vofr
may give u some idea of why it is not working
when i try first time i dont know that vofr has to be keyed in within
<fram interface dlci> .. good luck
aa
----------------------------------
!
voice-port 1/0/0
cptone SG
!
voice-port 1/0/1
!
!
dial-peer voice 3 pots
destination-pattern 8888
port 1/0/0
!
dial-peer voice 6 vofr
destination-pattern 7777
session target Serial0/1 827
!
!
interface Serial0/1
bandwidth 115
no ip address
encapsulation frame-relay
frame-relay traffic-shaping
!
interface Serial0/1.3 point-to-point
ip address 135.25.9.9 255.255.255.252
frame-relay interface-dlci 827
class vofr
vofr cisco
!
router eigrp 1
network 135.25.0.0
no auto-summary
no eigrp log-neighbor-changes
!
ip classless
ip http server
!
!
map-class frame-relay vofr
frame-relay cir 115000
frame-relay bc 14000
frame-relay be 0
no frame-relay adaptive-shaping
frame-relay fair-queue
frame-relay voice bandwidth 115000
frame-relay fragment 160
-----------------------------------------------------------------
!
interface Serial0/1
bandwidth 115
no ip address
encapsulation frame-relay
frame-relay traffic-shaping
!
interface Serial0/1.1 point-to-point
ip address 135.25.9.10 255.255.255.252
frame-relay interface-dlci 728
class vofr
vofr cisco
!
map-class frame-relay vofr
frame-relay cir 115000
frame-relay bc 14000
frame-relay be 0
no frame-relay adaptive-shaping
frame-relay fair-queue
frame-relay voice bandwidth 115000
frame-relay fragment 160
!
voice-port 1/0/0
cptone SG
timeouts ringing 60
!
voice-port 1/0/1
!
dial-peer voice 1 pots
destination-pattern 7777
port 1/0/0
!
dial-peer voice 10 vofr
destination-pattern 8888
session target Serial0/1 728
!
!
router eigrp 1
network 135.25.0.0
no auto-summary
no eigrp log-neighbor-changes
alias exec c config t
!
line con 0
exec-timeout 0 0
privilege level 15
transport input none
line aux 0
line vty 0 4
login
!
end
"Benny Chong" <c_benny@hotmail.com>
Sent by: nobody@groupstudy.com
28-10-02 07:30 AM
Please respond to "Benny Chong"
To: ccielab@groupstudy.com
cc:
Subject: Any working VoFR and VoATM config?
Hi all experts,
I spent lots of time figuring out the config in Solie's book, I just can't
make it work. Can someone provide me with a working config for Vofr and
VoATM?
Thanks a lot!
Benny
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:57 GMT-3