From: ccie001@vip.sina.com
Date: Sun Oct 27 2002 - 22:29:11 GMT-3
Because the interface is DTE not DCE ,so you can't set clock rate!
----- Original Message -----
From:Peng Zheng <zpnist@yahoo.com>
To:ccielab@groupstudy.com
Subject:Setting clock rate for DTE's is not allowed
Date:Mon, 28 Oct 2002 02:06:50 +0800
> When I set up the clock rate for AGS router ( I want
> it to be a frame-relay switch), after I set up:
>
> no ip address
> encapsulation frame-relay
> frame-relay lmi-type ansi
> frame-relay intf-type dce
>
> I type :
> clock rate 64000, then I got:
> Setting clock rate for DTE's is not allowed
>
> Does anyone know what't the problem?
>
> Thank you for help.
>
> Best Wishes,
> Peng Zheng
>
> __________________________________________________
> Do you Yahoo!?
> Y! Web Hosting - Let the expert host your web site
> http://webhosting.yahoo.com/
>
>
______________________________________
===================================================================
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:57 GMT-3