From: Todd Veillette (tveillette@myeastern.com)
Date: Tue Oct 29 2002 - 02:26:59 GMT-3
Brian,
You pass the lab by the commands you type into the network
devices. Hyperterm, SecureCRT, Teraterm, putty, or whatever
terminal emulator you use, connect to the devices. Not one of
them will generate commands you need to configure the devices
to pass the exam, no matter how proficient you are with it.
Yet, if you know the material, it doesn't matter which on you have;
the commands you type into the devices will be the same, and the result
will be the same.
So I'd say a good plan would be to learn the material.
-TV
----- Original Message -----
From: "Bryan Long" <bryanandholly@hotmail.com>
To: "Tim Medley" <tim.medley@ireadyworld.com>; <ccielab@groupstudy.com>
Sent: Monday, October 28, 2002 8:13 PM
Subject: Re: RTP terminal client
> What you are missing is the sheer number of clients out there. In order to
> prepare properly and save every valuable second, it makes sense to work
with
> and become familiar with the actual tool being used. If you know
everything
> and can type lighting fast, then you have no need to be concerned with
your
> surroundings or your tools at hand.
>
> The diffenence between SecureCRT and Hyperterm is night and day as far as
I
> am concerned. To each his own....
>
>
> Bryan
> ----- Original Message -----
> From: "Tim Medley" <tim.medley@ireadyworld.com>
> To: "Bryan Long" <bryanandholly@hotmail.com>; <ccielab@groupstudy.com>
> Sent: Sunday, October 27, 2002 11:14 AM
> Subject: RE: RTP terminal client
>
>
> I'm not attacking anyone. I am curious why it matters what terminal client
> is used at any of the lab sites?
>
> Correct me if I am wrong but I've not seen anything in the blueprint about
> being tested on a terminal client during the lab.
>
> To me the terminal client is just a window to type commands into.
>
> Perhaps I am missing something?
>
> tm
>
>
>
> Tim Medley, CCNP+Voice, CCDP, CWNA
> Sr. Network Architect
> VoIP Group
> iReadyWorld
>
> p 704.943.3615
> f 704.588.2826
>
>
> -----Original Message-----
> From: Bryan Long [mailto:bryanandholly@hotmail.com]
> Sent: Sunday, October 27, 2002 1:15 AM
> To: ccielab@groupstudy.com
> Subject: RTP terminal client
>
>
> Does anyone know which terminal client RTP is currently running? Hyperterm
> or what?
>
> Thanks!
>
> Bryan
This archive was generated by hypermail 2.1.4 : Tue Nov 05 2002 - 08:35:58 GMT-3