From: anthony ohanusi (ohanusi@lagos.sns.slb.com)
Date: Tue Nov 05 2002 - 14:12:01 GMT-3
I guess what i will do is enable ip classless on r1,r2,r3
with default-information originate on router 1 in the igrp router mode
Anyone with other ways
Regards
At 05:09 PM 11/5/2002, you wrote:
>here:
>
>(s0)router1(e0)-----(e0)router2(s1)--------(s1)router3
>
>router1: s0(172.10.10.1/255.255.255.192) e0(172.10.20.1/255.255.255.0)
>
>router2: e0(172.10.20.2/255.255.255.0) s1(172.10.30.1/255.255.255.0)
>
>router1's s0 in ospf area 0, router1's e0 and router2's e0 in ospf area
>1, router2's s1 and router3's s1 in igrp, then redistribute them
>
>on router2. So how can router3 see the route about router1's s0? in
>normal redistribution you cannot see this route, and you cannot
>
>do it with static or null0 route. please help!
>
>
>
>---------------------------------
>Do You Yahoo!?
>"JGIT>+S"Bp#?P!JTE#56;qJ1IP4s=1#!"
--
Sema UKI Phase II Integration Team
Schlumberger Network & Infrastructure Solutions
Ohanusi Anthony
Technical Consulting
Schlumberger Network Solution
South Quay Plaza 11
138 Marsh Wall
LONDON E149SH
Tel : +44(0)2075172628
Main: +44(0)207514000
Fax: +44(0)207514002
Mail-ohanusi2000@yahoo.com
CONFIDENTIAL & PRIVILEGED COMMUNICATION
The information contained in this message is privileged, confidential, and
protected from disclosure. This message is intended for the individual or
entity addressed herein. If you are not the intended recipient, please do
not read, copy, use or disclose this communication to others; also please
notify the sender by replying to this message, and then delete it from your
system. The sender totally disclaims, and will not accept, any
responsibility or liability for the unauthorized use, or the consequences
of any unauthorized use, of this communication or message. Thank you.
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:53 GMT-3