From: MADMAN (dave@interprise.com)
Date: Wed Nov 13 2002 - 17:49:48 GMT-3
What do you mean a "layer 3 etherchannel"??
Dave
Weidong Xiao wrote:
>
> Hi group,
>
> I was running EMI on a 3550 and 'ip routing' enabled, but couldn't set up a layer 3 etherchannel.
> Can somebody tell me what I missed?
>
> Thanks in advance,
>
> Weidong
>
> --------------------------------
> interface FastEthernet0/1
> description LINK-TO-RSW1
> no ip address
> duplex full
> speed 100
> channel-group 1 mode desirable non-silent
> !
> interface FastEthernet0/2
> description LINK-TO-RSW1
> no ip address
> duplex full
> speed 100
> channel-group 1 mode desirable non-silent
>
> and then:
>
> SW3(config)#interface Port-channel1
> SW3(config-if)#no sw
> SW3(config-if)#no switchport
> Command rejected: Not a convertable port. <-------WHY?
> SW3(config-if)#ip address 2.2.2.2 255.0.0.0
>
> % IP addresses may not be configured on L2 links.
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"You don't make the poor richer by making the rich poorer." --Winston Churchill
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:59 GMT-3