From: A.Gesse (A.Gesse@race.ru)
Date: Thu Nov 14 2002 - 11:12:29 GMT-3
May be wrong baud speed in terminal app.
Try from 1200 to 9600
Alex
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On
> Behalf Of Gene_Thorne@doh.state.fl.us
> Sent: Thursday, November 14, 2002 4:10 PM
> To: cchurch@optonline.net; ccielab@groupstudy.com
> Subject: RE: HP Ethertwist Plus info?
>
>
> Good idea. So far I have tried only a straight-through
> DB9-DB25 serial. I'll
> dig up a null modem cable and give it a shot.
> -Gene
>
> -----Original Message-----
> From: Chuck Church [mailto:cchurch@optonline.net]
> Sent: Wednesday, November 13, 2002 4:36 PM
> To: Gene_Thorne@doh.state.fl.us; ccielab@groupstudy.com
> Subject: Re: HP Ethertwist Plus info?
>
>
> Gene,
>
> Not sure about the hub features, but what kind of cable
> did you try to
> connect to it with? A lot of 3Coms use a null modem cable,
> not a rollover
> cable like Cisco's use. Maybe you're just using the wrong
> cable. Laplink
> cables work also.
>
> Chuck Church
> CCIE #8776, MCNE, MCSE
>
>
> ----- Original Message -----
> From: <Gene_Thorne@doh.state.fl.us>
> To: <ccielab@groupstudy.com>
> Sent: Wednesday, November 13, 2002 11:22 AM
> Subject: OT: HP Ethertwist Plus info?
>
>
> > I recently acquired a used 19" rack for my lab gear and
> mounted in it was
> an
> > HP Ethertwist Plus hub, model 28699a. I have searched the
> HP website for a
> > manual or other info about it and all I can find is a
> firmware update, a
> mib
> > file and that it is a "managed hub". There is an RS232
> console port, but
> it
> > doesn't respond to my terminal program. Anyone know where I
> might find
> some
> > info about this box?
> > -Thanks
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:22:59 GMT-3