From: Jeff Kesemeyer (jkesemey@bellsouth.net)
Date: Thu Nov 14 2002 - 21:37:43 GMT-3
With this configured:
interface ATM0/0
atm pvc 1 0 16 ilmi
atm ilmi-pvc-discovery
Do a show atm pvc and you should get something like this:
sho atm pvc
VCD / Peak Avg/Min
Burst
Interface Name VPI VCI Type Encaps SC Kbps Kbps
Cells Sts
0 2 0 200 PVC NLPID UBR 155000
UP
Where 0/200 is you pvc..
HTH,
Jeff Kesemeyer
CCNP, CCDP, MCSE, CNE
www.bradshawlabs.com
"Your CCIE Rack Rental Source"
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Nate Kleven
Sent: Thursday, November 14, 2002 6:07 PM
To: ccielab@groupstudy.com
Subject: ATM ILMI-PVC-AUTODISCOVERY
I am trying to use the ATM ILMI-PVC-AUTODISCOVERY command in a rack that
I am renting and I can't tell if I am doing it right or not.
R7(config-if)#pvc 0/16 ilmi
R7(config-if-atm-vc)#exit
R7(config-if)#atm ilmi-pvc-discovery
R7(config-if)#exit
R7(config)#int atm1/0
R7(config-if)#ip address 120.20.70.4 255.255.255.0
1d01h: %LANE-6-INFO: ATM1/0: ILMI prefix add event received
Based on the fact that I got the system message "ILMI prefix add event
received" should I assume that it worked? Is there any other way for me
to verify?
Thanks in advance.
Nate
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:00 GMT-3