From: Chuck Church (cchurch@optonline.net)
Date: Sat Nov 16 2002 - 16:53:31 GMT-3
Danny,
I've had 2500s that acted like that. Did you try a newer version of
hyper terminal? Did you try playing with the flow control settings and
turning off the FIFO buffers for your com port, which I think you'll find
under advanced somewhere?
Chuck Church
CCIE #8776, MCNE, MCSE
----- Original Message -----
From: "Connelly.Sylvester@btinternet.com"
<connelly.sylvester@btinternet.com>
To: "Chris Young" <csyoung@speakeasy.net>; <ccielab@groupstudy.com>
Sent: Saturday, November 16, 2002 11:32 AM
Subject: Re: Trouble with a 3620
> Chris,
>
> It seems as through the console is faulty, it boots up ok with all the
> boot/system messages, but I cannot type or configure anything on the
console
> port.
>
> All has to be inputed via the AUX port.
>
> God help the day when I wr erase in error.
>
> Thanks for you help.
>
> Regards,
>
> Danny
> ----- Original Message -----
> From: "Chris Young" <csyoung@speakeasy.net>
> To: "'Connelly.Sylvester@btinternet.com'"
> <connelly.sylvester@btinternet.com>; <ccielab@groupstudy.com>
> Sent: Saturday, November 16, 2002 2:46 AM
> Subject: RE: Trouble with a 3620
>
>
> > Danny,
> >
> > It sounds like either the config register is set to some odd-ball
> > setting for the console port baud settings or the console port is just
> > dead.
> >
> > Do you get anything to echo on the screen when you try 9600,8,n,1?
> >
> > Chris
> >
> >
> > -----Original Message-----
> > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> > Connelly.Sylvester@btinternet.com
> > Sent: Friday, November 15, 2002 8:52 PM
> > To: ccielab@groupstudy.com
> > Subject: Trouble with a 3620
> >
> > Is there an expert out there that knows about the 3620's. I have a
> > problem
> > for some unkown reason the console port is not working, I can only use
> > the
> > AUX port of configuration.
> >
> > Any help will be appriciated?
> >
> > Regards,
> >
> > Danny Sylvester
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:02 GMT-3