From: Gary Lileikis (glileikis@rogers.com)
Date: Tue Nov 19 2002 - 12:46:22 GMT-3
This does not appear to work.
-----Original Message-----
From: Robert Massiache [mailto:robert2140@hotmail.com] 
Sent: Tuesday, November 19, 2002 1:33 AM
To: donny.mateo@sg.ca-indosuez.com
Cc: ccielab@groupstudy.com
Subject: Re: How to change distance for some ex eigrp route
Hi,
using the access-list in the distance command can't we specify only the
DEx 
routes if you do not bother about the Ex routes?  doesn't it solve the 
issue? Just a thought...
thanks
>From: "Donny MATEO" <donny.mateo@sg.ca-indosuez.com>
>Reply-To: "Donny MATEO" <donny.mateo@sg.ca-indosuez.com>
>To: "Robert Massiache" <robert2140@hotmail.com>
>CC: ccielab@groupstudy.com
>Subject: Re: How to change distance for some ex eigrp route
>Date: Tue, 19 Nov 2002 13:52:39 +0800
>
>the original question was for a specific route.
>
>there are two command for distance under the router configuration mode 
>The first one is based on ACL < distance xxx src mask acl-num> the 
>second one is based on the routing protocol < distance eigrp|ospf|bgp>
>
>only the first one can be use for selective route, but as the original
>poster indicated it does not
>effect external route. So the question is whether it is possible to
change 
>the distance of
>"particular" external route and if yes by what command ?
>
>Your solution would change the distance of all eigrp internal route to 
>100
>and all eigrp external
>(redistributed) route into 200. Now if you would like to modify only 
>particular route,, how do you
>do that ?
>
>Donny
>
>
>
>                       "Robert
>                       Massiache"               To:       
>donny.mateo@sg.ca-indosuez.com
>                       <robert2140@hotma        cc:       
>ccielab@groupstudy.com
>                       il.com>                  Subject:  Re: How to
change 
>distance for some ex eigrp route
>
>                       19-11-2002 12:59
>
>
>
>
>
>
>You don't even need the rotue-map. I used it for OSPF so I thought 
>there would be a similar way for EIGRP too.
>
>R4(config-router)#distance eigrp ?
>   <1-255>  Distance for internal routes R4(config-router)#distance 
>eigrp 100 ?
>   <1-255>  Distance for external routes R4(config-router)#distance 
>eigrp 100 200 ?
>   <cr>
>R4(config-router)#distance eigrp 100 200
>
>
>thanks
>Robert M
>
>
>
>
>
>
>
> >From: "Donny MATEO" <donny.mateo@sg.ca-indosuez.com>
> >Reply-To: "Donny MATEO" <donny.mateo@sg.ca-indosuez.com>
> >To: "Robert Massiache" <robert2140@hotmail.com>
> >CC: ccielab@groupstudy.com
> >Subject: Re: How to change distance for some ex eigrp route
> >Date: Tue, 19 Nov 2002 11:26:06 +0800
> >
> >Can't seems to find the command for that one under router eigrp. What
> >IOS version are you using ?
> >
> >
> >
> >
> >                       "Robert
> >                       Massiache"               To:
> >guoqicui@yahoo.com, ccielab@groupstudy.com
> >                       <robert2140@hotma        cc:
> >                       il.com>                  Subject:  Re: How to 
>change
> >distance for some ex eigrp route
> >                       Sent by:
> >                       nobody@groupstudy
> >                       .com
> >
> >
> >                       19-11-2002 10:43
> >                       Please respond to
> >                       "Robert
> >                       Massiache"
> >
> >
> >
> >
> >
> >
> >use the route-map instead. You got the option of matching external 
> >routes alone. ITs avalable for bgp, ospf and as well as eigrp.
> >
> >Just call the route-map from the distance command. I never tried for
>eigrp
> >but I know it works fine for OSPF E2 routes.
> >
> >thanks
> >
> >
> >
> >
> >
> > >From: Guoqi Cui <guoqicui@yahoo.com>
> > >Reply-To: Guoqi Cui <guoqicui@yahoo.com>
> > >To: ccielab@groupstudy.com
> > >Subject: How to change distance for some ex eigrp route
> > >Date: Mon, 18 Nov 2002 16:44:31 -0800 (PST)
> > >
> > >Hi, group:
> > >Is there a way to change the adminstrative distance
> > >of some selected "EX D" eigrp routes.
> > >
> > >I tried:
> > >distance 100 x.x.x.x y.y.y.y acc-num
> > >
> > >This command only change the  distance of routes with
> > >tag "D". There is no effect for "D Ex" routes.
> > >
> > >distance eigrp 100 100
> > >
> > >will change the distance of all routes.
> > >
> > >what I need is a way to change only the distance of a selected 
> > >routes.
> > >
> > >Thank you.
> > >
> > >Guoqi
> > >
> > >
> > >__________________________________________________
> > >Do you Yahoo!?
> > >Yahoo! Web Hosting - Let the expert host your site 
> > >http://webhosting.yahoo.com
> >
> >
> >_________________________________________________________________
> >Tired of spam? Get advanced junk mail protection with MSN 8. 
> >http://join.msn.com/?page=features/junkmail
> >
> >
> >
> >
> >
> >This message is for information purposes only and its content should 
> >not be construed as an offer, or solicitation of an offer, to buy or 
> >sell any banking or financial instruments or services and no 
> >representation or warranty is given in respect of its accuracy, 
> >completeness or fairness. The material is subject to change without 
> >notice. You should take your own independent tax, legal and other 
> >professional advice in respect of the content of this message. This 
> >message may contain confidential or legally privileged material and 
> >may not be copied, redistributed or published (in whole or in part) 
> >without our prior written consent. This email may have been 
> >intercepted, partially destroyed, arrive late, incomplete or contain 
> >viruses and no liability is accepted by any member of the Credit 
> >Agricole Indosuez group as a result. If you are not the intended 
> >recipient of this message, please immediately notify the sender and 
> >delete this message from your computer.
>
>
>_________________________________________________________________
>MSN 8 helps eliminate e-mail viruses. Get 2 months FREE*. 
>http://join.msn.com/?page=features/virus
>
>
>
>
>
>
>This message is for information purposes only and its content should 
>not be construed as an offer, or solicitation of an offer, to buy or 
>sell any banking or financial instruments or services and no 
>representation or warranty is given in respect of its accuracy, 
>completeness or fairness. The material is subject to change without 
>notice. You should take your own independent tax, legal and other 
>professional advice in respect of the content of this message. This 
>message may contain confidential or legally privileged material and may
>not be copied, redistributed or published (in whole or in part) without
>our prior written consent. This email may have been intercepted, 
>partially destroyed, arrive late, incomplete or contain viruses and no 
>liability is accepted by any member of the Credit Agricole Indosuez 
>group as a result. If you are not the intended recipient of this 
>message, please immediately notify the sender and delete this message
>from your computer.
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:06 GMT-3