From: Tim Fletcher (tim@fletchmail.net)
Date: Tue Nov 19 2002 - 13:37:57 GMT-3
Oops, I meant to say r13 will NOT have a route to r14.
On Tue, 19 Nov 2002, Tim Fletcher wrote:
> Take a look at the routing table on r13. Unless I missed something, it
> will have a route to r14, so the echo reply cannot get back. Debug ip icmp
> on r13 should confirm that the echo request is getting there.
>
> -tim
>
> On Mon, 18 Nov 2002, Jennifer Bellucci wrote:
>
> > I have configured the following:
> >
> > r13----cat3550---r14
> >
> > The config is provided below. On r14, the router is learning the route
> > 50.50.50.0 and 60.60.60.0 through BGP and is in routing table, but I am unable
> > to ping it.
> > The CAT3550 can ping the loopbacks.
> > Can you please have a look at the config and let me know what I am doing
> > wrong.
> >
> > R14
> >
> > !
> >
> > interface FastEthernet0/0
> >
> > ip address 131.108.171.14 255.255.255.224
> >
> > duplex auto
> >
> > speed auto
> >
> > !
> >
> > !
> >
> > router bgp 400
> >
> > no synchronization
> >
> > bgp router-id 131.108.171.14
> >
> > bgp log-neighbor-changes
> >
> > neighbor 131.108.171.10 remote-as 300
> >
> > no auto-summary
> >
> > !
> >
> >
> >
> > R13
> >
> > !
> >
> > !
> >
> > interface Loopback0
> >
> > ip address 50.50.50.1 255.255.255.0
> >
> > !
> >
> > interface Loopback1
> >
> > ip address 60.60.60.1 255.255.255.0
> >
> > !
> >
> > interface Ethernet1/0
> >
> > ip address 100.100.100.13 255.255.255.0
> >
> > half-duplex
> >
> > !
> >
> > router eigrp 100
> >
> > network 50.50.50.0 0.0.0.255
> >
> > network 60.60.60.0 0.0.0.255
> >
> > network 100.100.100.0 0.0.0.255
> >
> > no auto-summary
> >
> > no eigrp log-neighbor-changes
> >
> > !
> >
> > router bgp 300
> >
> > no synchronization
> >
> > bgp router-id 100.100.100.13
> >
> > bgp cluster-id 1010580481
> >
> > bgp log-neighbor-changes
> >
> > redistribute eigrp 100 metric 50
> >
> > neighbor 100.100.100.10 remote-as 300
> >
> > neighbor 100.100.100.10 route-reflector-client
> >
> > no auto-summary
> >
> > !
> >
> >
> >
> > CAT3550
> >
> > !
> >
> > interface FastEthernet0/14
> >
> > no switchport
> >
> > ip address 131.108.171.10 255.255.255.224
> >
> > no ip split-horizon
> >
> > !
> >
> > interface FastEthernet0/23
> >
> > no switchport
> >
> > ip address 100.100.100.10 255.255.255.0
> >
> > no ip split-horizon
> >
> > !
> >
> > router eigrp 100
> >
> > network 100.100.100.0 0.0.0.255
> >
> > distribute-list 1 in
> >
> > auto-summary
> >
> > no eigrp log-neighbor-changes
> >
> > !
> >
> > router bgp 300
> >
> > no synchronization
> >
> > bgp router-id 100.100.100.10
> >
> > bgp log-neighbor-changes
> >
> > neighbor 100.100.100.13 remote-as 300
> >
> > neighbor 131.108.171.14 remote-as 400
> >
> > no auto-summary
> >
> > !
> >
> > access-list 1 deny any log
> >
> > route-map eigrpdeny permit 10
> >
> > match ip address 1
> >
> > !
> >
> >
> >
> >
> >
> > r14-3640#I
> >
> > Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
> >
> > D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
> >
> > N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
> >
> > E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
> >
> > i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter
> > area
> >
> > * - candidate default, U - per-user static route, o - ODR
> >
> > P - periodic downloaded static route
> >
> >
> >
> > Gateway of last resort is not set
> >
> >
> >
> > 50.0.0.0/24 is subnetted, 1 subnets
> >
> > B 50.50.50.0 [20/0] via 131.108.171.10, 00:10:47
> >
> > 100.0.0.0/24 is subnetted, 1 subnets
> >
> > B 100.100.100.0 [20/0] via 131.108.171.10, 00:10:47
> >
> > 10.0.0.0/24 is subnetted, 1 subnets
> >
> > C 10.10.10.0 is directly connected, ATM2/0
> >
> > 131.108.0.0/27 is subnetted, 1 subnets
> >
> > C 131.108.171.0 is directly connected, FastEthernet0/0
> >
> > 121.0.0.0/24 is subnetted, 2 subnets
> >
> > C 121.121.121.0 is directly connected, Loopback0
> >
> > C 121.121.122.0 is directly connected, Loopback1
> >
> > 60.0.0.0/24 is subnetted, 1 subnets
> >
> > B 60.60.60.0 [20/0] via 131.108.171.10, 00:10:48
> >
> >
> >
> > r14-3640#ping 50.50.50.1
> >
> >
> >
> > Type escape sequence to abort.
> >
> > Sending 5, 100-byte ICMP Echos to 50.50.50.1, timeout is 2 seconds:
> >
> > .....
> >
> > Success rate is 0 percent (0/5)
> >
> >
> >
> > Jennifer Bellucci
> >
> > Jennifer_bellucci@hotmail.com
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:06 GMT-3