From: Gary Lileikis (glileikis@rogers.com)
Date: Tue Nov 19 2002 - 19:03:34 GMT-3
How about this?
interface Serial0/0.2 multipoint
ip address 150.100.1.5 255.255.255.240
no ip route-cache
no ip mroute-cache
frame-relay interface-dlci 501
class frameclass1
frame-relay interface-dlci 503
class frameclass2
Regards,
Gary
-----Original Message-----
From: MADMAN [mailto:dave@interprise.com]
Sent: Tuesday, November 19, 2002 4:28 PM
To: syv
Cc: ccielab@groupstudy.com
Subject: Re: FRTS & DLCI
I thought there was a way but couldn't think of it so I asked a peer
of mine, Evan who get to go to the lab in a couple days, and he had a
answer.
Lab candidates seem to know how to do these things you don't generally
want to do:)
interface Serial4/0.1 multipoint
ip address 140.4.1.3 255.255.255.240
ip ospf message-digest-key 1 md5 cisco
ip ospf hello-interval 10
ip ospf priority 10
frame-relay map llc2 302
frame-relay map llc2 305
frame-relay interface-dlci 302
frame-relay interface-dlci 305
!
R3_7507(config)#int s4/0.1
R3_7507(config-subif)#fram
R3_7507(config-subif)#frame-relay int R3_7507(config-subif)#frame-relay
interface-dlci 302 R3_7507(config-fr-dlci)#? Frame Relay dlci
configuration commands:
class Assign a mapclass to a dlci
apply your class to the interface-dlci command.
Dave via Evan Teisberg!
syv wrote:
>
> Hi,
>
> I have an frame-relay subinterface multipoint with multiple DLCIs.
>
> How to assign the traffic-shapping per DLCI?
> I can't seem to assign the a separate map class to separate DLCIs
>
> --
> Thanks
> syv@911networks.com
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"You don't make the poor richer by making the rich poorer." --Winston Churchill
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:07 GMT-3