From: syv (syv@911networks.com)
Date: Tue Nov 19 2002 - 23:10:24 GMT-3
On Tuesday, November 19, 2002, Gary Lileikis wrote:
Great, thanks to everybody.
-----Original Message-----
GL> How about this?
GL> interface Serial0/0.2 multipoint
GL> ip address 150.100.1.5 255.255.255.240
GL> no ip route-cache
GL> no ip mroute-cache
GL> frame-relay interface-dlci 501
GL> class frameclass1
GL> frame-relay interface-dlci 503
GL> class frameclass2
GL> Regards,
GL> Gary
GL> -----Original Message-----
GL> From: MADMAN [mailto:dave@interprise.com]
GL> Sent: Tuesday, November 19, 2002 4:28 PM
GL> To: syv
GL> Cc: ccielab@groupstudy.com
GL> Subject: Re: FRTS & DLCI
GL> I thought there was a way but couldn't think of it so I asked a peer
GL> of mine, Evan who get to go to the lab in a couple days, and he had a
GL> answer.
GL> Lab candidates seem to know how to do these things you don't generally
GL> want to do:)
GL> interface Serial4/0.1 multipoint
GL> ip address 140.4.1.3 255.255.255.240
GL> ip ospf message-digest-key 1 md5 cisco
GL> ip ospf hello-interval 10
GL> ip ospf priority 10
GL> frame-relay map llc2 302
GL> frame-relay map llc2 305
GL> frame-relay interface-dlci 302
GL> frame-relay interface-dlci 305
GL> !
GL> R3_7507(config)#int s4/0.1
GL> R3_7507(config-subif)#fram
GL> R3_7507(config-subif)#frame-relay int R3_7507(config-subif)#frame-relay
GL> interface-dlci 302 R3_7507(config-fr-dlci)#? Frame Relay dlci
GL> configuration commands:
GL> class Assign a mapclass to a dlci
GL> apply your class to the interface-dlci command.
GL> Dave via Evan Teisberg!
GL> syv wrote:
>>
>> Hi,
>>
>> I have an frame-relay subinterface multipoint with multiple DLCIs.
>>
>> How to assign the traffic-shapping per DLCI?
>> I can't seem to assign the a separate map class to separate DLCIs
>>
>> --
>> Thanks
>> syv@911networks.com
-- Thanks syv@911networks.com
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:07 GMT-3