From: dayo olabisi (ccie_student@yahoo.com)
Date: Wed Nov 20 2002 - 17:59:17 GMT-3
sh isdn stat doesn't show any spid entries (since
they're not configured).
I'm presently trying to hunt down a bill so I can ask
the provider.
thx for the suggestions.
dayo
--- Tim Fletcher <tim@fletchmail.net> wrote:
> You might try "isdn autodetect" in interface config
> mode. You have to set
> the switch type 1st.
>
> I've never had much luck with this, but it can't
> hurt to try.
>
> -tim
>
> On Wed, 20 Nov 2002, dayo olabisi wrote:
>
> > Hi Listers,
> >
> > is there any way to detect the spids for an ISDN
> line
> > on a router?
> >
> > By some stroke of fate/foolishness, an engineer
> (not
> > me ;-)) deleted the spids statements on a router -
> and
> > now I want to bring up the ISDN connection.
> >
> > "sh isdn stat" shows Layer 1 ACTIVE and Layer 2
> > MULTIPLE_FRAME_ESTABLISHED. So I'm sure the router
> is
> > talking to an ISDN switch.
> >
> > help needed urgently...
> >
> > thx,
> > dayo
> >
> > __________________________________________________
> > Do you Yahoo!?
> > Yahoo! Web Hosting - Let the expert host your site
> > http://webhosting.yahoo.com
> >
>
This archive was generated by hypermail 2.1.4 : Tue Dec 03 2002 - 07:23:07 GMT-3