From: Evgeny Tantsura (ivgen@castel.nl)
Date: Tue Dec 17 2002 - 10:13:32 GMT-3
There are 2 atm interfaces configured.
interface ATM0/0/0 has VPI/VCI 1 32
interface ATM0/0/1 has VPI/VCI 2 33
atm pvc 2 33 interface ATM0/0/0 1 32 line is for atm
routing between 2 atm interfaces.
One routing statement for 2 interfaces in enough for atm routing to work.
(The configuration for reverse atm path is automatically done by the atm
swtich)
interface ATM0/0/0
no ip address
no atm ilmi-keepalive
!
interface ATM0/0/1
no ip address
no atm ilmi-keepalive
atm pvc 2 33 interface ATM0/0/0 1 32
> If you look in the archives, there was a discussion on ATM in November,
> and the thread inlcuded an LS1010 config.
>
> HTH
> Surja
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Rasheim Myers
> Sent: Friday, December 13, 2002 8:28 AM
> To: ccielab@groupstudy.com
> Subject: ATM SVC/PVC
>
>
> Does anyone have an ATM LS1010 SVC/PVC configuration? I have access to the
> switch but do not have a configuration to work from.
>
> Thanks
> Rasheim
> .
> .
With kind regards/ met vriendelijke groeten,
------------------------------------------------
E. Tantsura
Network Developer
Essent Kabelcom N.V.
Dr.van Deenweg 84
8025BN Zwolle, The Netherlands
Tel: +31-(0)38-850-7642
Fax: +31-(0)38-850-7410
Mob: +31-(0)6-290-80458
------------------------------------------------
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:47 GMT-3