From: Stefano Lassi (stefano.lassi@sysma.it)
Date: Mon Dec 23 2002 - 04:28:13 GMT-3
Dear friends,
actually you/we were in right ...
PIX got a problem on motherboard power cable connection (fans power supply was fine instead),
I changed motherboard power cable and now all works fine
Anyway seller agreed with me to get back stuff and fix it, but I solved at last try before to repack PIX ...
Thank you very much to all
Merry Christmas and Happy New Year
Stefano Lassi
CCNP/CCDP
Sysma Srl - Genova
ITALY - Europe
>From: "Stefano Lassi" <stefano.lassi@sysma.it>
>Reply-To: "Stefano Lassi" <stefano.lassi@sysma.it>
>To: <ccielab@groupstudy.com>
>Subject: OT: PIX520-FO-BUN console output
>Date: Wed, 18 Dec 2002 11:19:42 +0100
>
>Dear friends,
>
>
>I just got a used PIX520 failover chassis
>
>
>what is puzzling me is that powering on PIX520 I don't get any output from
>serial console; of course same console cable, and same Hyperterminal conf,
>are working with other routers/Pixs.
>
>Also it seems that no led activity nor noise is caming from floppy trying
>to load Boot Helper.
>
>Who sold me PIX said that is normal and I have just to plug failover
>chassis in cluster with primary ... but at least I know (from PIX515
>experience) that a PIX cluster can't work without same PIX OS release on
>both chassis ..., so how I could upgrade PIX OS if I can't get in via
>console?
>
>My impression is that used PIX I bought is not working at all ... is it
>reasonable?
>
>
>Thank you very much
>
>Stefano Lassi
>CCNP/CCDP
>Sysma Srl - Genova
>ITALY - Europe
>.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:51 GMT-3