From: Hunt Lee (ciscoforme3@yahoo.com.au)
Date: Fri Dec 27 2002 - 11:01:47 GMT-3
Thank you guys =)
After I did the bit-swapping, the dlsw Icanreach commands works ok.
Thanks again for the help.
Regards,
Hunt
--- Aamer Kaleem <kaleemaamer@yahoo.com> wrote: > On RTRB you need to specify
icanreach mac-address
> (00-50-04-B9-45-84) in bit-swapped format....
>
> Thank you,
>
> Aamer
> --- Hunt Lee <ciscoforme3@yahoo.com.au> wrote:
> > Merry Christmas and Happy New Year!!! I can't find
> > anything else better to do than
> > to play with my routers. So much fun! =)
> >
> > My question - is there any trick to the commands:-
> >
> > dlsw icanreach mac-exclusive
> > &
> > dlsw icanreach mac-address <xxxx.xxxx.xxxx>?
> >
> > I have the following lab setup:-
> >
> > RTA
> > / \
> > WebCentral11---RTB RTC --- Hardcat-laptop
> >
> > Both workstations are on Ethernet.
> >
> > And the three routers are in a Frame-relay network.
> >
> > I must have done something fundermentally wrong.
> > Since if I remove the 2 icanreach
> > commands, everything is ok (i.e. I can see Network
> > neighborhood, I can see the DLSW
> > circuit up etc). But as soon as I put back the
> > commands, I can't see anything.
> >
> > My laptop (WebCentral11)'s MAC address is
> > 0050.04b9.4584.
> >
> > C:\>ipconfig /all
> >
> >
> > Ethernet adapter Local Area Connection:
> >
> > Connection-specific DNS Suffix . :
> > Description . . . . . . . . . . . : FE575C-3COM
> > 10/100 LAN CardBus-Fast Ethernet
> > Physical Address. . . . . . . . . :
> > 00-50-04-B9-45-84
> > Dhcp Enabled. . . . . . . . . . . : Yes
> > Autoconfiguration Enabled . . . . : Yes
> > Autoconfiguration IP Address. . . : 169.254.205.7
> > Subnet Mask . . . . . . . . . . . : 255.255.0.0
> > Default Gateway . . . . . . . . . :
> >
> > C:\>
> >
> > And I have confirmed it with:-
> >
> > RTB#sh bridge
> >
> > Total of 300 station blocks, 298 free
> > Codes: P - permanent, S - self
> >
> > Bridge Group 1:
> >
> > Address Action Interface Age RX
> > count TX count
> > 0050.ba76.ea5f forward DLSw Port0 0
> > 1 1
> > 0050.04b9.4584 forward Ethernet0 0
> > 1 0
> > RTB#
> >
> > RTC#sh bridge
> >
> > Total of 300 station blocks, 298 free
> > Codes: P - permanent, S - self
> >
> > Bridge Group 1:
> >
> > Address Action Interface Age RX
> > count TX count
> > 0050.ba76.ea5f forward Ethernet0 0
> > 9 1
> > 0050.04b9.4584 forward DLSw Port0 0
> > 1 3
> > RTC#
> >
> > And here's the config:-
> >
> > For RTB-
> >
> > dlsw local-peer peer-id 1.1.1.1 promiscuous
> > dlsw icanreach mac-exclusive
> > dlsw icanreach mac-address 0050.04b9.4584 mask
> > ffff.ffff.ffff
> > dlsw bridge-group 1
> >
> > interface Loopback0
> > ip address 1.1.1.1 255.255.255.255
> >
> > interface Ethernet0
> > no ip address
> > bridge-group 1
> >
> > bridge 1 protocol ieee
> >
> > As for RTC-
> >
> > dlsw local-peer peer-id 2.2.2.2
> > dlsw remote-peer 0 tcp 1.1.1.1
> > dlsw bridge-group 1
> >
> > interface Loopback1
> > ip address 2.2.2.2 255.255.255.255
> >
> > interface Ethernet0
> > no ip address
> > bridge-group 1
> >
> > bridge 1 protocol ieee
> >
> >
> > It would be greatly appreciated if anyone can shed
> > some light on this.
> >
> >
> > Hunt
> >
> > http://movies.yahoo.com.au - Yahoo! Movies
> > - What's on at your local cinema?
> > .
> >
> __________________________________________________________________
> > To unsubscribe from the CCIELAB list, send a message
> > to
> > majordomo@groupstudy.com with the body containing:
> > unsubscribe ccielab
>
>
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com
> .
http://movies.yahoo.com.au - Yahoo! Movies
- What's on at your local cinema?
.
This archive was generated by hypermail 2.1.4 : Fri Jan 17 2003 - 17:21:53 GMT-3