From: Scott Morris (swm@emanon.com)
Date: Mon Dec 30 2002 - 10:36:18 GMT-3
While technically, yes you can... However, you would be permitting a
LOT more than the scenario told you to. From a security standpoint,
this isn't a good idea, and from a CCIE lab standpoint, it's not a good
idea either.
Be specific, do no more, do no less.
Hope that helps.
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Pandora
Sent: Monday, December 30, 2002 4:51 AM
To: ccielab@groupstudy.com
Subject: Ccbootcamp lab1 question
Hi,
In bootcamp lab1, we need to create access-list in order to do policy
routing, the answer show the following access-list in r5 (for example):
"access-list 101 permit ip any 10.4.0.0 0.0.255.255
access-list 101 permit ip any 10.34.0.0 0.0.255.255
access-list 101 permit ip any 137.20.20.0 0.0.0.255
access-list 101 permit ip any host 10.10.1.2
access-list 101 permit ip any host 10.10.1.3
access-list 101 permit ip any 10.44.0.0 0.0.255.255"
However, can I modify to following in order to "save" the command?
"access-list 101 permit ip any 137.20.20.0 0.0.0.255 Access-list 101
permit ip any 10.0.0.0 0.255.255.255"
Any idea?
Pandora YL
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:39 GMT-3