From: _mkadlc _ (mkadlc@hotmail.com)
Date: Fri Jan 10 2003 - 17:14:47 GMT-3
If you are in a loop from a messy config a way to find out is to reboot
the switch and as soon as the command line will let you enter the switch
console command to enter into the sup. (this is a way to get into it if
you have the entry that the mod 15 is empy and cant sess 15 into the
router. from the switch console comand you can get to the romon mode and
do your deal.
Matthew
>From: MADMAN >Reply-To: MADMAN >To: Peter Wodle >CC:
ccielab@groupstudy.com >Subject: Re: OT: CAT 6006 with WS-X6K-SUP1A-2GE
Card Realoding >Date: Fri, 10 Jan 2003 13:38:00 -0600 > > You can't get a
console prompt so I assume it's in a continuous >looping boot. If so
power it down and reseat the card. If that >doesn't work power down and
deinstall all cards except one SUP card >and try booting it up. If it
comes up start OIRing the other cards. > I have seen more than once a
line card causing a reloading >situation. > > Dave > >Peter Wodle wrote:
>>Any ideas why CAT 6006 with WS-X6K-SUP1A-2GE Card is Realoding? I
>>think it could be messy config. I can not get to console prompt. Is
>>there any way to erase/by pass the config? >>thanks >> >> >> >> >>
>>_________________________________________________________________ >>The
new MSN 8 is here: Try it free* for 2 months
>>http://join.msn.com/?page=dept/dialup >>. >-- >David Madland >CCIE#
2016 >Sr. Network Engineer >Qwest Communications >612-664-3367 > >"You
don't make the poor richer by making the rich poorer." >--Winston
>Churchill >.
>__________________________________________________________________ >To
unsubscribe from the CCIELAB list, send a message to
>majordomo@groupstudy.com with the body containing: >unsubscribe ccielab
------------------------------------------------------------------------
MSN 8: advanced junk mail protection and 2 months FREE*
.
This archive was generated by hypermail 2.1.4 : Sat Feb 01 2003 - 07:33:47 GMT-3