From: Howard C. Berkowitz (hcb@gettcomm.com)
Date: Fri Feb 07 2003 - 23:28:43 GMT-3
This seems like an IPexpert customer support issue. Why are you
posting it here? It's one thing to discuss commercial lab issues
with other students (and the posts should be marked COM), but another
thing to request specific fixes here.
Howard Berkowitz
Member of Moderation Team
At 3:42 PM -0800 2/7/03, Mustafa M Bayramov wrote:
>The scenario itself very interested but I found a lot of
>mistakes/mistypes etc
>
>Lab 307
>A configure R3 - R4 using DLCI (but it should be R2 - R3) I work
>with this lab an hour and after that I realize that it mistyped.
>(price for each e-scenario 50$ and I'm not so reach to buy mistyped
>scenario )
>
>Lab 308
>
>In section A you required configure EIGRP 308 on backbone frame-relay
>
>But then in section B you asked to configure AS 305 on all routers
>expect ATM/ISDN interface .
>Well I made this but after that I look at IPexpert itself solution I did
>find any EIGRP AS 305.
>
>Dear IPexpert could you post all fix to all you lab scenarios?
>
>
>
>Mustafa M Bayramov
>
>CISSP
>CCNP,CCDP,Cisco Security Specialist
>Network engineer and security analyst
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:16 GMT-3