From: Joe Chang (changjoe@earthlink.net)
Date: Tue Feb 11 2003 - 23:43:11 GMT-3
Check out "set as-path"
http://www.cisco.com/univercd/cc/td/doc/product/software/ios121/121cgcr/ip_r
/iprprt2/1rdbgp.htm#1020911
----- Original Message -----
From: "Fan Shan" <fansh@publicf.bta.net.cn>
To: "Ccielab@Groupstudy.Com" <ccielab@groupstudy.com>
Sent: Tuesday, February 11, 2003 10:09 PM
Subject: Can I change the as-path?
> BGP configuration:
>
> R1---------------R2---------------------R3
> AS1-------------AS2--------------------AS3
>
> Assume a loopback interface 192.168.1.0 /24 on R1, and was advertised to
R3.
> The as-path on R3 should be 2-1,
> can I change it to be 2 , as it is originated from AS2?
> .
.
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:19 GMT-3