From: MADMAN (dave@interprise.com)
Date: Thu Feb 13 2003 - 18:18:00 GMT-3
When an MSFC is in ROMMOM the show mod will not show the existance of
the MSFC, it's out to lunch. You have to do a "switch con x" to
communicate with the MSFC in ROMMON.
dave
Ken Diliberto wrote:
> What does "sh mod" (show modules) say?
>
>
>>>>"Georg Pauwen" <pauwen@hotmail.com> 02/13/03 11:18AM >>>
>>>
> Hello colleagues,
>
> I have a Catalyst 6509 running CatOS, and when I type 4sess 154in order
> to
> access the MSFC, I get a 4Module 15 not installed4 message. When I type
>
> 4switch console4 I can access the MSFC but it is in ROMMON mode.
> When I type 4dir bootflash4 from the ROMMON prompt, I can see that
> there is
> only a C6MSFC2-boot file. I know that I need to have e.g. a
> c6msfc2-jo3sv-mz.121-13.E4 image in bootflash in order for the MSFC to
> work.
> But how do I get the image into bootflash ? I tried to TFTP it into
> bootflash from the CatOS command prompt, but I don4t see it in the
> bootflash
> directory accessible from the ROMMON prompt of the MSFC after that.
> I basically need an instruction on how to get a 6509 with a Supervisor
> II
> and an MSFC to work. I checked the Cisco website but could only find to
>
> change back from Native to Hybrid. Does anybody have an idea or a good
> link
> ?
> Thanks for your help in advance.
>
> Regards,
>
> Georg
>
>
>
>
>
>
> _________________________________________________________________
> MSN Search, le moteur de recherche qui pense comme vous !
> http://search.msn.fr/worldwide.asp
> .
> .
-- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367"You don't make the poor richer by making the rich poorer." --Winston Churchill .
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:22 GMT-3