From: Jason Sinclair (sinclairj@powertel.com.au)
Date: Wed Feb 19 2003 - 20:14:32 GMT-3
Ivan,
You can achieve this using the Cisco DSPU feature. I have posted about this
in the past and there should be some message in the archives. If you search
for DSPU in the archives this returns about 10 posts on how to configure
this. If you get stuck, please let me know.
Regards,
Jason Sinclair CCIE #9100
Manager, Network Control Centre
POWERTEL
55 Clarence Street,
SYDNEY NSW 2000
AUSTRALIA
office: + 61 2 8264 3820
mobile: + 61 416 105 858
email: sinclairj@powertel.com.au
-----Original Message-----
From: limmti [mailto:limmti@yahoo.com.sg]
Sent: Wednesday, 19 February 2003 19:46
To: ccielab@groupstudy.com
Subject: How to activate the DLSW circuit on Router
Hi All,
Is it possible to generate some sort of SNA or Netbois
traffic on Cisco Router in order to test the DLSW
circuit connectivity to the remote end?
Any advice is appreciated.
Thank you
Best Regards,
Ivan
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:31 GMT-3