Re: dialer-idle timer and dialer-watch

From: Herve Bruyere (hbruyere@cisco.com)
Date: Mon Feb 24 2003 - 12:25:55 GMT-3


Do you map the watched routes in the dialer map?

regards,
Herve

Cezar Fistik wrote:
> Hi group,
>
> Accoring to K.Solie's book after dialer-idle timer expires the router
> performs a check if the watched routes appear in the routing table through
> other interface than bri. If the route is present it brings down the isdn
> link if not the idle timer is reset and the link is maintained. In my case
> it didn't happen. After idle timer expired the isdn link was just brought
> down. The serial interface through which the watched routes were initialy
> learned was down and isdn interface was down too. That's all. I didn't
> configure an idle timer on bri interfaces. The router used the default. Is
> there anything magic that I forgot to do?
>
> Thanks,
> Cezar Fistik
>

--


This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:33 GMT-3