From: martin vlahos (martin1997ca@yahoo.ca)
Date: Mon Feb 24 2003 - 17:50:36 GMT-3
you can add a map from your ip address , but I don't think you have to worry about ping your own IP .
Configuring the Idle Timeout Interval
You can specify an interval of inactivity after which any idle SVC on an interface is torn down. This timeout interval might help control costs and free router memory and other resources for other uses.
To change the idle timeout interval, use the following command in interface-ATM-VC configuration mode:
Command Purpose idle-timeout seconds [minimum-rate]
Configure the interval of inactivity after which an idle SVC will be torn down.
In addition to configuring the interval of inactivity, you can optionally specify the minimum-rate in kilobits per second (kbps). This is the minimum traffic rate required on an ATM SVC to maintain the connection.
Cezar Fistik <cfistik@moldovacc.md> wrote:Is it possible? Should I do something like in case of frame-relay, adding a
map to router's own interface?
Thanks,
Cezar Fistik
---------------------------------
Post your free ad now! Yahoo! Canada Personals
This archive was generated by hypermail 2.1.4 : Sat Mar 01 2003 - 11:06:34 GMT-3