From: Daniel Cisco Group Study (danielcgs@imc.net.au)
Date: Thu Mar 06 2003 - 17:56:19 GMT-3
Have you tried placing "no exec" on the lines?
Daniel
-----Original Message-----
From: Danny Andaluz andaluz [mailto:dannyandaluz@comcast.net]
Sent: Friday, 7 March 2003 5:23 AM
To: ccielab@groupstudy.com
Subject: Access-server problems
I have had an access server for my lab for some time now. While doing
write erases/reload on my routers after a lab, I accidentally did this
on the AS. I put the configuration back exactly as it was and now when
I reverse telnet to one of the lines, I get a flood of garbage
characters. Eventually this stops and I get the router console, but
it's pretty annoying. I am pretty sure I have the correct config since
I copied it from Caslow's book. Any ideas?
TIA,
Danny
**********************************************************************
This email and any files transmitted with it are confidential and
intended solely for the use of the individual or entity to whom they
are addressed. If you have received this email in error please notify
the system manager.
This footnote also confirms that this email message has been swept by
MIMEsweeper for the presence of computer viruses.
www.mimesweeper.com
**********************************************************************
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:34 GMT-3