From: boby2kusa (boby2kusa@hotmail.com)
Date: Wed Mar 12 2003 - 20:41:56 GMT-3
Is this what you are looking for? You have to create a mac access-list
extended <word>. Then under the extended access-list iether deby or permit
the ether-type.
3550(config-ext-macl)#deny any any ?
<0-65535> An arbitrary EtherType in decimal, hex, or octal
aarp EtherType: AppleTalk ARP
amber EtherType: DEC-Amber
appletalk EtherType: AppleTalk/EtherTalk
cos CoS value
dec-spanning EtherType: DEC-Spanning-Tree
decnet-iv EtherType: DECnet Phase IV
diagnostic EtherType: DEC-Diagnostic
dsm EtherType: DEC-DSM
etype-6000 EtherType: 0x6000
etype-8042 EtherType: 0x8042
lat EtherType: DEC-LAT
lavc-sca EtherType: DEC-LAVC-SCA
lsap LSAP value
mop-console EtherType: DEC-MOP Remote Console
mop-dump EtherType: DEC-MOP Dump
msdos EtherType: DEC-MSDOS
mumps EtherType: DEC-MUMPS
netbios EtherType: DEC-NETBIOS
vines-echo EtherType: VINES Echo
vines-ip EtherType: VINES IP
xns-idp EtherType: XNS IDP
<cr>
----- Original Message -----
From: "Charles Church" <cchurch@wamnet.com>
To: "Jung, Jin" <jin.jung@lmco.com>; "CCIE Lab GroupStudy"
<ccielab@groupstudy.com>
Sent: Wednesday, March 12, 2003 10:23 AM
Subject: RE: Filtering Ethernet type in Cat3550
> Are you referring to which company owns which MAC addresses, since the
first
> 24 bits identify the manufacturer? If so, it's:
> http://standards.ieee.org/regauth/oui/index.shtml under the OUI category.
> IEEE owns this mapping, so it should always be up to date.
>
> Chuck Church
> CCIE #8776, MCNE, MCSE
> Wam!Net Government Services
> 13600 EDS Dr.
> Herndon, VA 20171
> cell 585-233-2706
> cchurch@wamnet.com
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com]On Behalf Of
> Jung, Jin
> Sent: Tuesday, March 11, 2003 7:44 AM
> To: CCIE Lab GroupStudy
> Subject: RE: Filtering Ethernet type in Cat3550
>
>
> Does someone have list of all the mac to Ethernet types?
>
> I am specially interested in old IBM Ethernet types.
>
> I was not able to find it in CCO.
>
> Thanks
>
>
> -----Original Message-----
> From: johnson_liu@corp.giga.net.tw [mailto:johnson_liu@corp.giga.net.tw]
> Sent: Tuesday, March 11, 2003 3:08 AM
> To: Budi Gunawan; CCIE Lab GroupStudy
> Subject: RE: Filtering Ethernet type in Cat3550
>
>
> Use mac acl to match ethernet type
>
> -----Original Message-----
> From: Budi Gunawan [mailto:bgunawan@hotpop.com]
> Sent: Tuesday, March 11, 2003 12:44 PM
> To: CCIE Lab GroupStudy
> Subject: Filtering Ethernet type in Cat3550
>
>
> Hi All,
>
> I have a question about how to filter Ethernet type in Catalyst 3550 ?
>
> Thanks and regards,
> BG.
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:38 GMT-3