From: Joe Chang (changjoe@earthlink.net)
Date: Sun Mar 30 2003 - 22:38:53 GMT-3
Unless "default-information originate" is specified, "redistribute <igp> ...
" will not allow the injection of a default route from the IGP.
Another way to acheive the same is "network 0.0.0.0 mask 0.0.0.0", to
explicitly inject an IGP default route into BGP.
----- Original Message -----
From: "cebuano" <cebu2ccie@cox.net>
To: <ccielab@groupstudy.com>
Sent: Sunday, March 30, 2003 1:18 AM
Subject: DEFAULT redistribution of IGP into BGP
> Hi all.
> I can't seem to figure out what this sentence means.
> Default redistribution of IGPs or EGP into BGP is not allowed unless the
> default-information originate router configuration command is specified.
>
> This was taken from IP Routing Protocol-Independent Commands:
> redistribute (IP) Through traffic-share min
> On
> CCO.cisco.com/en/US/products/sw/iosswrel/ps1835/products_command_referen
> ce_chapter09186a00800ca759.html
>
> Any comments or illustrated example?
>
> [GroupStudy removed an attachment of type image/gif which had a name of
image001.gif]
This archive was generated by hypermail 2.1.4 : Sat Apr 05 2003 - 08:51:46 GMT-3