Re: ISDN Backup

From: Donny MATEO (donny.mateo@sg.ca-indosuez.com)
Date: Thu Apr 10 2003 - 04:34:36 GMT-3


Hi Simon, I had not so similar setup.

got router A and B connected through several ISDN channel. the number on B router is not always available, cause the other router from satelite site might call this number as well.
but if memory serve me right, when the router failed to dial with the first number, it will try the next number sequentially. I'm using dialer profile configuration, so I'm not sure how it works with legacy dialer configuration on two different routers.[

Regards,
Donny

                                                                                                                                       
                      simonkc@netsol.co
                      .in To: ccielab@groupstudy.com, cisco@groupstudy.com
                      Sent by: cc:
                      nobody@groupstudy Subject: ISDN Backup
                      .com
                                                                                                                                       
                                                                                                                                       
                      10-04-2003 14:16
                      Please respond to
                      simonkc
                                                                                                                                       
                                                                                                                                       

Hi all,

Let's say we have a remote side router RouterA which fires ISDN to Central
side router RouterB on failure of it's serial link. Objective: In the event
of the unavailibility of RouterB, Router should fire ISDN to another Central
Site router RouterC.
It should fire ISDN to Router C only when it cannot connect to RouterB. ie.
It should always try RouterB first and then RouterC.

I am aware that you can put multiple dialer map command on RouterA with
different dialled numbers. But the router always dialled the number to which
it had connected successfully last time. It, sort of, remembered the last
successful number (maybe it was problem with the IOS ver. or maybe a
feature, i dunno)
Any ideas about how to acheive the above objective and that too predictably
and deterministically???

Thanks and Regards

Simon

This message is for information purposes only and its content
should not be construed as an offer, or solicitation of an offer,
to buy or sell any banking or financial instruments or services
and no representation or warranty is given in respect of its
accuracy, completeness or fairness. The material is subject
to change without notice. You should take your own independent
tax, legal and other professional advice in respect of the content
of this message. This message may contain confidential or
legally privileged material and may not be copied, redistributed
or published (in whole or in part) without our prior written consent.
This email may have been intercepted, partially destroyed,
arrive late, incomplete or contain viruses and no liability is
accepted by any member of the Credit Agricole Indosuez group
as a result. If you are not the intended recipient of this message,
please immediately notify the sender and delete this message
from your computer.



This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:50 GMT-3