From: Khalid A. Kaseb (khalid_ameen@rayaintegration.com)
Date: Thu Apr 10 2003 - 11:36:15 GMT-3
This is possible to be done, but you won't load balance or load share on
both b-channels if you didn't use PPP multilink command you will lose
this feature,
============================================
Khalid Ameen Kaseb
CCIE # 11282 R&S
Data Communication Department
Internetworking Engineer
Raya Integration - A Subsidiary of RAYA Holding
3 BIS Lebanon Square, Mohandessine, Giza
P.O.Box 23 Agouza
www.RayaIntegration.com
www.rayaholding.com
* Mobile: +2 010 5220564
* Tel: +2 02 3034212
* Fax: +2 02 3046925
* E-mail: khalid_ameen@RayaIntegration.com
==================================================
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Tom Young
Sent: Thursday, April 10, 2003 6:39 AM
To: ccielab@groupstudy.com
Subject: Multilink
Hi, group,
Does it possible to use the dialer load-threshold
command withOUT the ppp multilink command?
Thanks alot
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:50 GMT-3