From: Erick B. (erickbe@yahoo.com)
Date: Sat Apr 19 2003 - 03:31:09 GMT-3
Yinglam,
Yea, unfortunately we have lower end router and this
is for higher end at moment.
Brian,
Thanks for the DLSw note. I kind of figured something
along those lines but haven't had a opportunity to
look into it that much yet.
Not having bridge-groups over GRE tunnels work which
isn't supported anyway.
Could do static NAT on both sites over a tunnel. Would
be ugly but may satisfy requirements to a degree.
Thought about doing Mobile IP or PBR. Client wants the
users to share same VLAN / broadcast domain at both
sites but wants to keep a routed WAN for rest of
network. Doesn't have seperate PVCs / links for this
traffic that we can bridge over. So I don't think
mobile IP would fully meet that.
--- Yinglam Cheung <ccie6961@yahoo.com> wrote:
> Ethernet over MPLS. :)
>
> "Erick B." <erickbe@yahoo.com> wrote:Hi,
>
> I know this is sort of off-topic. Just was wondering
> if anyone has ever tried to use DLSW to bridge a
> VLAN
> between 2 sites over a routed WAN network. I have
> DLSW
> up and the VLAN sub interface is receiving traffic
> for
> each ping I'm doing from a host but the traffic
> doesn't appear to be picked up by DLSw and passed
> across the DLSW connection to other router and out
> the
> LAN interface there.
>
> Anyone know of any other solutions to get this to
> work
> besides plain bridging, with just routers?
>
> Thanks, Erick
This archive was generated by hypermail 2.1.4 : Thu May 01 2003 - 13:35:58 GMT-3