From: John Tafasi (johntafasi@yahoo.com)
Date: Fri May 09 2003 - 22:57:11 GMT-3
Hi Group,
When I execute the following command on a 3550 catalyst switch I receive an
unexpected error. Can some one find out what is the reason for this? I have
included a "show version" command at the end of this message.
Thanks
John Tafasi
3550#show ip interface vlan 2
^
% Invalid input detected at '^' marker.
3550#show ip interface vlan 1
Vlan1 is administratively down, line protocol is down
Internet protocol processing disabled
3550#
3550#show vlan
VLAN Name Status Ports
---- -------------------------------- --------- ----------------------------
---
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11,
Fa0/12
Fa0/13, Fa0/14, Fa0/15,
Fa0/16
Fa0/17, Fa0/18, Fa0/19,
Fa0/20
Fa0/21, Fa0/22, Fa0/23,
Fa0/24
Gi0/1, Gi0/2
2 vlan2 active
1002 fddi-default active
1003 token-ring-default active
1004 fddinet-default active
1005 trnet-default active
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1
Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ----
--
1 enet 100001 1500 - - - - - 0 0
2 enet 100002 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1
Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ----
--
1005 trnet 101005 1500 - - - ibm - 0 0
Remote SPAN VLANs
----------------------------------------------------------------------------
--
Primary Secondary Type Ports
------- --------- ----------------- ----------------------------------------
--
3550#
This archive was generated by hypermail 2.1.4 : Mon Jun 02 2003 - 15:13:40 GMT-3