From: Mike Schlenger (mschlenger@meridianitsolutions.com)
Date: Mon Jun 09 2003 - 16:35:04 GMT-3
You'll need <at least> a PVDM-256k-4 to get your FSX VIC working.
Mike
Michael Schlenger
CCIE #7079
Meridian IT Solutions
mschlenger@meridianitsolutions.com
847.592.3912
-----Original Message-----
From: Rick Guthier [mailto:rguthier@fuse.net]
Sent: Mon 6/9/2003 10:43 AM
To: ccielab@groupstudy.com
Cc:
Subject: VIC 2FXS mod in 1751 - should voice ports show up without PVDM installed?
I've got a 1751 router in my lab, and I'm getting ready to do some voice
labs. I've got a 2FXS mod in the 'slot2', and the slot2 LED lights up.
The ios is 12.2 IP/PLUS/VOICE. I do NOT have the PVDM module installed.
My question is this - should the voice ports show up in the config
without this module? When I do a 'show hardware' I do not see them, and
wanted to make sure the issue was the lack of the PVDM. If that's the
case, I'll buy one, but I just wanted to make sure I wasn't wasting my
money and had another hardware issue.
Thanks,
Rick.
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:55 GMT-3