From: Castelino, Flavian (Flavian.Castelino@nexinnovations.com)
Date: Wed Jun 11 2003 - 11:36:28 GMT-3
The helper-address command on the VLAN 77 interface on backbone
switch/router will direct requests from PCs on VLAN 77 to the DHCP
server. Ensure that default router for the subnet on the DHCP scope is
the VLAN 77 IP address
Flavian
-----Original Message-----
From: Emad [mailto:emad@zakq8.com]
Sent: Wednesday, June 11, 2003 1:04 AM
To: Castelino, Flavian; CCIE LAB (E-mail)
Subject: RE: switching::DHCP pool choice
Importance: High
I mean how can I force the PCs that will be connected to certain VLAN ,
say VLAN 77 , to take their Ips from subnet 77 range on the DHCP , does
your solution fit with that or we have to work around that again
Waiting
-----Original Message-----
From: Castelino, Flavian [mailto:Flavian.Castelino@nexinnovations.com]
Sent: Tuesday, June 10, 2003 4:37 PM
To: Emad; CCIE LAB (E-mail)
Subject: RE: switching::DHCP pool choice
Emad,
U will need layer 3 vlan interfaces on ur backbone switch corresponding
to the vlans on your edge switches, a ip helper-address command on each
layer 3 interface pointing to your DHCP server.
Flavian
-----Original Message-----
From: Emad [mailto:emad@zakq8.com]
Sent: Monday, June 09, 2003 2:27 PM
To: CCIE LAB (E-mail)
Subject: switching::DHCP pool choice
Folks,
I have a question here about certain case:
I have backbone switch connected to multiple edge switches , and I need
to have different VLANs , each connected to one edge switch , I
configured DHCP server with multiple subnets range , each switch has one
vlan with only one subnet , the question is, considering the backbone is
their gateway , how can I force each edge switch to have certain subnet
from the DHCP range , if it is possible , from backbone or from the edge
switches themselves!! Thanx in advance
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:56 GMT-3