Multicast NBMA Mode

From: Zhang, Ou (David) (OuDavid.Zhang@gs.com)
Date: Thu Jun 12 2003 - 02:04:59 GMT-3

• Next message: Emad: "RE: switching::DHCP pool choice"
• Previous message: Brian McGahan: "RE: CLIP SVC to work with out ILMI 0/16"
• Next in thread: Brian McGahan: "RE: Multicast NBMA Mode"
• Maybe reply: Brian McGahan: "RE: Multicast NBMA Mode"
• Maybe reply: kym blair: "Re: Multicast NBMA Mode"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

All,

PIM adjacency can be established between a hub and a spoke over frame relay
network without configuring NBMA mode. Source is attached to the hub and
receiver is attached to the spoke. Configured either static RP or auto RP.
MRM testing is successful between source and receiver. In what scenarios do
I need to configure NBMA mode ?

Thanks in advance.

-David

• Next message: Emad: "RE: switching::DHCP pool choice"
• Previous message: Brian McGahan: "RE: CLIP SVC to work with out ILMI 0/16"
• Next in thread: Brian McGahan: "RE: Multicast NBMA Mode"
• Maybe reply: Brian McGahan: "RE: Multicast NBMA Mode"
• Maybe reply: kym blair: "Re: Multicast NBMA Mode"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:56 GMT-3