From: Tony (lmac0303@hotmail.com)
Date: Mon Jun 16 2003 - 23:40:46 GMT-3
Hope this will help you out:
http://www.cisco.com/en/US/tech/tk583/tk385/technologies_tech_note09186a0080149ad6.shtml
Cheers,
Tony
----- Original Message -----
From: "Chen Kwong Wai William" <kwchen@netvigator.com>
To: <ccielab@groupstudy.com>
Sent: Monday, June 16, 2003 2:11 AM
Subject: ip directed-broadcast
> Dear all,
>
> Can anyone kindly explain to me what actually does, if I configure "no
ip directed-broadcast" on an Interface? Thx a lot.
>
> For example:
>
> (192.168.1.0/24) - (E0) Router (E1) - (192.168.2.0/24)
>
> Suppose, if directed broadcast is enable on E0, but disabled on E1,
then:
>
> 1) From 192.168.1.0, "ping 192.168.2.255" will be blocked?
> 2) From 192.168.2.0, "ping 192.168.1.255" will be blocked?
>
> Best Regards,
> William Chen
>
> Best Regards,
> William Chen
>
>
> _______________________________________________________________________
> You are subscribed to the GroupStudy.com CCIE R&S Discussion Group.
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
This archive was generated by hypermail 2.1.4 : Fri Jul 04 2003 - 11:10:59 GMT-3